HX-3013 UV Curing Adhesive Series
HX-3013 is an acrylic UV curing adhesive; Applied to the surface coating of plastic, glass, metal and other material products; Glue can be applied to any complex surface and can cure within seconds. UV curing can be achieved with either point or surface light sources; Can be used for in-situ curing, without flowability; It has the characteristics of rapid curing, good flexibility, and solvent-free.
List of Main Performance Parameters
state |
project |
Parameter performance |
Before curing |
Specific gravity, 25 ℃ g/cm3 |
1.2 |
Viscosity, 25 ℃ CPS |
32000 /- 3000 |
|
Thixotropic index (1/10rmp) |
2.1 |
|
Curing and shaping |
Thermal expansion coefficient (TMA) ppm/℃ |
110.3 (less than Tg) |
Elastic modulus (DMA), MPa |
0.6 |
|
Hardness (Shore A) |
70 |
|
Tg (DSC) |
10.9℃ |
|
Adhesive force (PMMA/Al), N/mm2 |
700 |
|
Linear shrinkage rate (%) |
1.5 |
|
Elongation rate (%) |
118 |
|
Breaking strength (MPa) |
1.2 |
|
Compression rate (%) (85 ℃ @ 22hr) |
10.2 |
|
Solvent resistance |
excellent |